Results for testing attachment jeti duplex e4
Jeti Box, suitable for programming the Master Basic, Master Spin, Jeti Spin, Jeti Duplex 2.4Ghz system... (not for X-Pro controller series)
Click For Info
Jeti DUPLEX 2, 4EX Pultsender DC-24 Multimode RC console 2, 4 GHz No. of channels: 24 Incl. receiver
Click For Info
This satellite receiver can also be connected as an extension to the following Duplex receivers: Duplex R10, Duplex R12, R14 and Duplex R18.You also have an option to connect this satellite receiver to the Mikado VStabi (with external plastic sensor), or to the Mikado Mini VStabi and numerous...
Click For Info
The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the...
Click For Info
The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the...
Click For Info
The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the...
Click For Info
The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the...
Click For Info
The MT 125 sensors are designed for measuring temperature of devices such as motors, controllers, batteries and other accessories in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz...
Click For Info
The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system.
Click For Info
The MU-3 sensor is used for monitoring up to three on-board voltages in model. The progress of 3 separate voltages can be monitored (minimum, maximum) with the help of MU-3 sensor. Moreover, the sensor notifies the user with exceeding of set parameters. Information of sensor is transmitted to the...
Click For Info
The duplex MSpeed sensor measures speed with the help of the dynamic pressure technology. The measured data is transmitted via the telemetry system and can be viewed with the help of a JETIBOX or JETIBOX mini.
Click For Info
You can store the date saved in MGPS module directly on your computer and view it in Google Maps or edit with the USB adapter for MGPS. You will need additional software for downloading the data from MGPS
Click For Info
The Jetibox mini is best suitable for fixing directly at the transmitter and for showing the measured values transmitted by JetiDuplex. It fits perfectly e.g. on the switch area of the GRP MC-transmitter. Besides this, the controllers of the MasterBasic and the controller MasterSpin series can also...
Click For Info
MRPM was developed for measuring the speed of all types of engines. The measurement is done using optical sensors. MRPM measures the current speed of the propeller and stores the maximum propeller speed. These values ??can be read directly with the JetiBox or can be attached to the receiver and...
Click For Info
The MRPM-AC sensor is exclusively used for measuring the speed of brushless AC motors (BLDC). It is connected to any of the two phases of motor and it starts calculating the current speed from the electronic process at the phases. With MRPM-AC sensor, you can monitor the current speed as well as...
Click For Info
This safety switch is needed for switching between the 35 MHz module and the duplex TU2 module. No soldering work necessary in case of GRP MC 19/22/24.
Click For Info
The DUPLEX R14 receiver offers the possibility to connect a DUPLEX 2.4GHz satellite receiver. The servo outputs can be assigned to any channels. Therefore there is no need to use V-cables. The JETIBOX unit is used for programming. The power can be supplied via an MPX connection or any Servo port.
Click For Info






















